[TowerTalk] T2X Starting Capacitor

[Carl]

I just ordered one today from C.A.T.S. for my HAM IV . It was 5.00 plus a couple
bucks shipping. I think the T2X uses the same CAP.  (130-156)

Carl  K8AV


----- Original Message ----- 
From: "WA2BPE" <wa2bpe at infoblvd.net>
To: "Bernard(wtrone)" <wtrone at comcast.net>
Cc: <towertalk at contesting.com>
Sent: Tuesday, January 18, 2005 1:40 PM
Subject: Re: [TowerTalk] T2X Starting Capacitor


>U can get them new from C.A.T.S. but what also works well is the plastic cased motor starting (AC) caps.  Since I switched to 
>using those, I have never had a cap fail.  Bear in mind, that
> you will have to check the physical size for a "fit" in the case.
>
> Tom - WA2BPE
>
> "Bernard(wtrone)" wrote:
>
>>         Do any of you have a good source or two for the 130-156MFD, 125 VAC starting capacitor used on the T2X rotor?
>>
>>         TIA.
>>
>>             73,
>>
>>             Bernard, WA4OEJ
>> _______________________________________________
>>
>> See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless Weather Stations", and lot's more.  Call Toll Free, 
>> 1-800-333-9041 with any questions and ask for Sherman, W2FLA.
>>
>> _______________________________________________
>> TowerTalk mailing list
>> TowerTalk at contesting.com
>> http://lists.contesting.com/mailman/listinfo/towertalk
>
> _______________________________________________
>
> See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless Weather Stations", and lot's more.  Call Toll Free, 
> 1-800-333-9041 with any questions and ask for Sherman, W2FLA.
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>