[TowerTalk] Proper bolt sizes for Rohn 25G

[Keith Dutson]

There is no stamp on them that I have seen.  However the ones from Texas
Towers are hot dip galvanized and fit the holes perfectly.  And they do not
rust.

Keith NM5G

-----Original Message-----
From: towertalk-bounces at contesting.com
[mailto:towertalk-bounces at contesting.com] On Behalf Of Jan Erik Holm
Sent: Wednesday, January 19, 2005 8:17 AM
Cc: towertalk at contesting.com
Subject: Re: [TowerTalk] Proper bolt sizes for Rohn 25G

Does ROHN use special "ROHN bolts" for their towers?

73 SM2EKM
-----------------------------------------------------

Keith Dutson wrote:

> I would purchase new Rohn bolts.  Texas Towers may have them in stock.
> 
> Keith NM5G
> 
> -----Original Message-----
> From: towertalk-bounces at contesting.com 
> [mailto:towertalk-bounces at contesting.com] On Behalf Of chris
> Sent: Wednesday, January 19, 2005 8:01 AM
> To: towertalk at contesting.com
> Subject: [TowerTalk] Proper bolt sizes for Rohn 25G
> 
> I took down my tower a few years back and discarded the old, rusted bolts.
> I cannot find a listing of the sizes for the bolts for the legs and 
> the house bracket.  All the Rohn literature I have does not cover the 
> fasteners by tower size.
> 
> I certainly would appreciate it, if someone could post the sizes for 
> the leg sections or point me to somewhere to find them.
> 
> Thanks,
> --
> Chris, K4AY
> 


_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless
Weather Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any
questions and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk at contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk