[TowerTalk] Buitternut HF6V

[W7TMT]

On my HF2V (very similar to the HF6V) the gap is only 5/8 inch. Its
not at all critical so don't worry about getting it exactly like the
original. If you're going err make the gap a little larger and you'll
have no problems if you run high power.

73 
Patrick 
W7TMT
 

-----Original Message-----
From: towertalk-bounces at contesting.com
[mailto:towertalk-bounces at contesting.com] On Behalf Of joe sloss
Sent: Saturday, January 22, 2005 0:50 AM
To: towertalk at contesting.com
Subject: [TowerTalk] Buitternut HF6V

Would appeciate knowing the dimension, in inches, of the space between
the aluminum mounting post (Part "A) and the antenna Base Section
(Part "B").  This space has an insulator rod and is spanned by Base
Matching Coil Q.  I am replacing the insulator rod and need to know
how far apart the two pieces of aluminum tubing are.

Many thanks,

Joe k7mks