[TowerTalk] Wilson antenna parts help

[Martin Sole]

Many thanks to all for the information received to date. Looks like I have
some good ideas on where to find the bits. Seems the clamps might be Hygain,
they used a similar fitting on some but not all antennas. Trap covers may
well be Mosley, or Hygain. I also have a lead on some possible original
Wilson parts.

I would probably agree that stainless worm drive clamps might well be better
than the original aluminium type but use of these means cutting slots into
the tube ends. I can do this but would prefer not too. At the end of the day
cost will play it's part so will see what transpires.

Thanks again for all the info.

73
Martin - HS0ZED


-----Original Message-----
From: towertalk-bounces at contesting.com
[mailto:towertalk-bounces at contesting.com] On Behalf Of Martin Sole
Sent: 23 January 2005 11:21
To: towertalk at contesting.com
Subject: [TowerTalk] Wilson antenna parts help

I have an old SY36 that I am resurrecting for use as a secondary antenna. It
looks like over the years several parts have gone missing or deteriorated
beyond use. Rather than get into detail here I have posted a picture of what
I am looking for at http://www.qsl.net/hs0zed/help.html 

Any help locating such parts greatly appreciated.

73
Martin - HS0ZED

_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless
Weather Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any
questions and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk at contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk