[TowerTalk] RE: TowerTalk Digest, Vol 25, Issue 139

[Keith Dutson]

This is not a house, no humans live in the barn.  The electric water heater
is a pulse unit, only about 30 percent average power drawn from mains.

Keith NM5G

-----Original Message-----
From: towertalk-bounces at contesting.com
[mailto:towertalk-bounces at contesting.com] On Behalf Of Gary Schafer
Sent: Monday, January 24, 2005 8:49 PM
To: keith at dutson.net
Cc: towertalk at contesting.com
Subject: Re: [TowerTalk] RE: TowerTalk Digest, Vol 25, Issue 139

Why do you think the wire rating should be any different than in the house?
Wire size should be rated for the full amount of the breaker. A 15 amp
breaker will not trip at 15 amps immediately. It takes several minutes. 
Some it takes almost twice that to ever trip them.
An electric water heater is a pretty constant load.

73
Gary  K4FMX


Keith Dutson wrote:
> Barn wiring is pretty simple.  Your wire needs to be rated at a bit 
> above half the breaker amperage to handle the anticipated constant 
> amperage.  Max current only happens when lights are first turned on and
motors/fans start.
> It's not like a house where you would be running several appliances at 
> one time.
> 
> Keith NM5G
> 
> -----Original Message-----
> From: towertalk-bounces at contesting.com 
> [mailto:towertalk-bounces at contesting.com] On Behalf Of Mike Maddox
> Sent: Monday, January 24, 2005 3:34 PM
> To: towertalk at contesting.com
> Subject: [TowerTalk] RE: TowerTalk Digest, Vol 25, Issue 139
> 
> 
> 
> A funny story along this line...
> 
> I was looking out the window toward the barn one night and saw all 
> lights going from bright to dim for a second or two, then back to bright,
etc.
> They were so dim it is almost as if someone was flicking the light switch.
> My XYL had just finished riding horses with some friends, and they 
> were taking saddles off and putting the horses back in the stalls.
> 
> Later while we were having supper I remarked about the lights.  She 
> said it was the water heater.  Seems she installed one of those 
> "instant" water heaters.  The next day I went out to see the heater.  It
is 230/240V, 50A.
> The mains to the barn is ONE 50A circuit on 10 gauge romex!
> 
> No, my XYL is not a ham.  I'll let you guess the color of her hair. 
> <grin>
> 
> The heater now has its own 50A circuit.
> 
> Keith NM5G
> 
> 
> Hope you are now using 6 gauge wire for a 50 amp circuit.  10 is rated 
> for 30 amps.  There are a lot of those kind of set ups around.  Maybe 
> it's the horse<sense>!  I've got a horse fanatic nearby that only has 
> a 60 amp service to her house (a total electric house) and 60 amps going
to her barn.
> Can't understand why parts of her walls get hot, and electric 
> appliances don't seem to last very long.  Gave up trying to explain it to
her.
> 
> 
> _______________________________________________
> 
> See: http://www.mscomputer.com  for "Self Supporting Towers", 
> "Wireless Weather Stations", and lot's more.  Call Toll Free, 
> 1-800-333-9041 with any questions and ask for Sherman, W2FLA.
> 
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
> 
> _______________________________________________
> 
> See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless
Weather Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any
questions and ask for Sherman, W2FLA.
> 
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
> 
> 



_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless
Weather Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any
questions and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk at contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk