[TowerTalk] Installing Copper Strap In Shack

[Gary Schafer]

Keith Dutson wrote:
> A load of Cu strap just arrived at the house, rolls of 3 in and 1.5 in.  The
> edge of the 3 in roll is somewhat battered and will need to be straightened.
> I plan to use a piece of wood and a hammer to do this while it is still
> rolled up.  Then the strap will be cut to length and installed from the
> station buss bar to the SPG, replacing the existing braid.
> 
> Any tips on cleaning/coating the copper to make and keep it nice and bright?
> I don't want it to turn color over time if at all possible.  Also, the strap
> runs across a space between the desk and wall that is accessed infrequently.
> When access is required, would you just unbolt the strap, or is there a
> convenient way to make a quick disconnect?  TIA
> 
> Keith NM5G

Scotch pads work well for cleaning.

Don't forget to use a copper hammer when pounding on the strap. Don't 
want to contaminate it with any iron.
An alligator clip will work for a quick disconnect.   :>)

73
Gary  K4FMX