[TowerTalk] Tower Rust Repair

W3YY w3yy at cox.net
Mon Jan 31 18:47:46 EST 2005


John -

Myself and another local friend used Rust Bullet for the first time last 
year and so far we are very happy with it.  Bring several sets of disposable 
gloves and full body painter's coveralls, however, or you will look like the 
Tin Man from the Wizard of Oz when you're done.  This stuff gets on 
everything.

I'd recommend applying with a sponge.  It's messier than a brush, but about 
4 times faster.

73, Bob - W3YY


----- Original Message ----- 
From: "John Crovelli" <w2gd at hotmail.com>
To: <towertalk at contesting.com>
Sent: Thursday, January 27, 2005 2:43 PM
Subject: [TowerTalk] Tower Rust Repair


> I'm about to enbark upon a tower painting project on Aruba.  In past years 
> I've used various products such as ZRC Cold Galvanizing Compound, POR15, 
> and Brite to name a few with varying degrees of success.  The conditions 
> on Aruba are extreme....with constant salt and wind  with sand that tends 
> to etch the steel, especially on the east side of towers..
>
> I just read the specs on a product called Rust Bullet.  Apparently it 
> chemically combines with the rust and claims to be UV resistant (unlike 
> POR15).  They recommend two coats.
>
> Has anyone used Rust Bullet to repair tower rust....or does anyone have 
> other product recommendations?
>
> John W2GD (aka P40W)
> w2gd at hotmail.com
>
>
> _______________________________________________
>
> See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless 
> Weather Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with 
> any questions and ask for Sherman, W2FLA.
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
> 




More information about the TowerTalk mailing list