[TowerTalk] elevated verticals....radial config.

[Tom Rauch]

You also have to watch the feedline and mounting very
carefully. When you use less than 10 radials feedline
currents start to be an issue. When you use two radials it
is a big problem.
73, Tom W8JI

----- Original Message ----- 
From: "Terry Conboy" <n6ry at arrl.net>
To: <jimjarvis at ieee.org>; <towertalk at contesting.com>

> According to modeling in EZNEC, as long as the two radials
are symmetrical
> (180 degrees apart, same slope), the azimuth and elevation
patterns are
> very uniform, and the horizontal radiation cancels quite
well in the far field.