[TowerTalk] Mounting 4 square verticals
Larry Emery
k1uo at uninets.net
Tue May 24 17:24:42 EDT 2005
These Resin Support Block Clamps are ideal and can be purchased from
DX Engineering in sizes to 2 1/2 inches. Look in theAntenna Building
Parts section.
http://www.dxengineering.com/Parts.asp?ID=184&PLID=24&SecID=1&DeptID=21&PartNo=DXE%2DRSB%2DI20000Another method that works extremely well is using materials from thelikes of Home Depot. That is the use of a sleeve of PVC of theproper diameter to fit the tubing used and then held in place withconduit clamps mounted on the 4X4 post.Larry K1UO----- Original Message -----From: <douglas.snowden at med.va.gov>To: <towertalk at contesting.com>Sent: Tuesday, May 24, 2005 4:01 PMSubject: [TowerTalk] Mounting 4 square verticalsI am going to be making a trip to the irrigation tubing supplier in acoupleofdays. Plan on buying several pieces for a 40m 4 square. I don't havetheambitionfor a 80m 4 square yet. My question is: If I put the pipe on 4X4pressuretreatedposts, do I need to worry about insulating them? I would guess Iwould havethema foot off the ground. Or if I elevated them 6 ft or so would thatmake adifference?I have put verticals up in the past, and was ignorant of any path tog
roundthough thewood I used. I see on the "net" a few pictures of insulated 80verticals.Doug N4IJ_______________________________________________See: http://www.mscomputer.com for "Self Supporting Towers","Wireless Weather Stations", and lot's more. Call Toll Free,1-800-333-9041 with any questions and ask for Sherman, W2FLA._______________________________________________TowerTalk mailing listTowerTalk at contesting.comhttp://lists.contesting.com/mailman/listinfo/towertalk
More information about the TowerTalk
mailing list