[TowerTalk] tailtwister

Jon Zaimes AA1K jz73 at verizon.net
Mon Nov 21 11:23:16 EST 2005

Use the resistance chart and voltage chart in the manual to make sure you don't have a wiring problem before you go to the trouble of removing the rotor. The resistance measurements are made in the shack, after removing the wires from the control box. The voltage measurements are made at the rotor, with someone else working the control box in the shack. You should also first measure the voltages at the control box to make sure the problem isn't in the box.

73/Jon AA1K

More information about the TowerTalk mailing list