[TowerTalk] [BULK] - Tashjian Towers

[KJ6Y@aol.com]

Gary,
To fit a tailtwister inside of an LM-470, you need to add a spacer  
underneath the rotor plate to raise it up about 1 1/2 inches.  A piece of  angle iron 
is what the factory used to supply.  It had a short piece of  threaded rod 
welded on and the rotor plate had holes in each corner.  I've  used stainless 
steel hose clamps to hold the angle pieces in place and the plate  rest on top.
It gives you that extra clearance for the rotor ears to clear the diagonal  
bracing.  

Skip,  KJ6Y
_Communications Service  Co_ (http://members.aol.com/kj6y/skip.html) 
818-887-3569