[TowerTalk] [BULK] - Tashjian Towers

[KJ6Y@aol.com]

You raise the plate, not the rotor.
I should probably climb my tower and take a digital picture and post  it.
Maybe in my spare time.
 
The M2 2800 will fit very nicely into the LM-470.  You might have to  take 
the clamps off to get it inside but it will fit. Being a triangle design,  
rotate it so the sides are parallel with the tower sides.  Drill out the  mounting 
holes to accommodate the 3/8" bolts on the bottom. I also recommend the  
safety wire kit available from M2.  

Skip,  KJ6Y
_Communications Service  Co_ (http://members.aol.com/kj6y/skip.html) 
818-887-3569