[TowerTalk] [BULK] - Tashjian Towers

[Saad Mahaini]

The plate on mine rest on the z braces not the clamp on type, so you cant
adjust its location.  It goes in only one way.  I raised the rotor above the
plate with couple pieces of square Channel

Thanks for the hints for mounting the M2

   

-----Original Message-----
From: towertalk-bounces at contesting.com
[mailto:towertalk-bounces at contesting.com] On Behalf Of KJ6Y at aol.com
Sent: Monday, September 12, 2005 10:20 AM
To: n5ff at comcast.net; gfisher100 at frontiernet.net; towertalk at contesting.com
Subject: Re: [TowerTalk] [BULK] - Tashjian Towers

You raise the plate, not the rotor.
I should probably climb my tower and take a digital picture and post  it.
Maybe in my spare time.
 
The M2 2800 will fit very nicely into the LM-470.  You might have to  take 
the clamps off to get it inside but it will fit. Being a triangle design,  
rotate it so the sides are parallel with the tower sides.  Drill out the
mounting 
holes to accommodate the 3/8" bolts on the bottom. I also recommend the  
safety wire kit available from M2.  

Skip,  KJ6Y
_Communications Service  Co_ (http://members.aol.com/kj6y/skip.html) 
818-887-3569 

_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless
Weather Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any
questions and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk at contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk