[TowerTalk] Feeding a Hygain 6m antenna

[ersmar@comcast.net]

Scott:

     I have a similar connection between the coax balun and the connection point on my Bencher Skyhawk triband Yagi.  I posted something to TowerTalk at that time: http://lists.contesting.com/archives//html/Towertalk/2002-10/msg00391.html  .  Hope this helps.

73 de
Gene Smar  AD3F


> I recently acquired a Hygain 6m yagi.  It uses an open-wire coax feed (coax
> connected to two screw terminals).  I'm concerned about corrosion and water
> ingress in the coax.  What is the best technique to secure these
> connections?  Are there any products that will limit water from wicking up
> the coax?
>  
> Thanks,
>  
> Scott N7SS
> _______________________________________________
> 
> See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless Weather 
> Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any questions 
> and ask for Sherman, W2FLA.
> 
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk