[TowerTalk] [SteppIR] Belden 9913F7 & N Connector

[Julio Peralta]

When 9913 first came out and special N connectors weren't available I
would tin the center conductor and use a Dremel tool to reduce the
diameter to fit the pin of the N connector I was using.

Julio, W4HY

-----Original Message-----
From: SteppIR at yahoogroups.com [mailto:SteppIR at yahoogroups.com] On Behalf
Of frederickmott
Sent: Thursday, September 22, 2005 8:41 PM
To: SteppIR at yahoogroups.com
Subject: [SteppIR] Belden 9913F7 & N Connector

I am having a little difficulty installing a N Connector onto a 20 
foot length of Belden 9913F7 for my 4 element SteppIR.  My problem is 
that I am unable to insert the 7 strand center conductor into the 
pin.  The hole diameter is too small.  Any work arounds or suggestions 
would be appreciated.  I don't have any extra pins that have a larger 
solder hole.  Fred, AB8AH





------------------------ Yahoo! Groups Sponsor --------------------~--> 
Get fast access to your favorite Yahoo! Groups. Make Yahoo! your home
page
http://us.click.yahoo.com/dpRU5A/wUILAA/yQLSAA/ELTolB/TM
--------------------------------------------------------------------~-> 

 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/SteppIR/

<*> To unsubscribe from this group, send an email to:
    SteppIR-unsubscribe at yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/