[TowerTalk] Digging a tower foundation hole

[J. Hector Garcia XE2K]

Steve

I'm Mexican ,  it will be a pleasure charge you $100.00 dlls hourly just to  be in your house to see your hole diggin process and say how to do it 

NOT ALL THE  Mexicans  that are around  are cheap or have no work

BETTER  OPTION , BRING YOUR OWN PEOPLE FROM  LA OR MS  TO HELP YOU , I JUST READ 200,000  HAVE NO WORK ,  HELP AN AMERICAN  GIVE A JOB
 



On 22 Sep 2005 19:51 PDT you wrote:

> In a message dated 9/22/2005 3:02:31 PM Pacific Daylight Time, 
> towertalk-request at contesting.com writes:
> 
> >>  Maybe I will be able to get a bobcat back there. It's not the width I'm
> worried about, but rather height. It would need to be less than 6 or 7 feet
> tall in order to fit under a "lean-to" that is permanently attached to one
> side of the house. I'll look into small bobcats or a hand auger. That sounds
> like the best plan.
> 
>     I rented a little excavator that had movable treads (it might've been a 
> Bobcat). They retracted to around 48" I think - it was enough to drive it 
> through the gate in the fence anyway - and then extended a foot or so for the 
> needed stable platform when we got back to the digging site.
> 
>     Also, you're in California - hire some Mexicans. There are always lots 
> hanging around your local hardware store/lumber yard and are willing to work. 
> The latest I paid was $12 per hour in Santa Cruz. Cheaper than Labor Ready, et 
> al. 
> 
> Cheers,
> Steve     K7LXC
> TOWER TECH -
> Professional tower services for commercial and amateur (until the end of the 
> year, anyway)
> Cell: 206-890-4188
> _______________________________________________
> 
> See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless Weather Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any questions and ask for Sherman, W2FLA.
> 
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk