[TowerTalk] strange rotor problem

[W0MU Mike Fatchett]

The bearings that AN Wireless and Array Solutions do call for some grease
and there is a zerk (sp) fitting for a grease gun.  

Rohn bearings should be dry.

Mike W0MU 

-----Original Message-----
From: towertalk-bounces at contesting.com
[mailto:towertalk-bounces at contesting.com] On Behalf Of Cqtestk4xs at aol.com
Sent: Saturday, April 01, 2006 8:34 PM
To: TOWERTALK at contesting.com
Subject: Re: [TowerTalk] strange rotor problem

In a message dated 4/2/06 12:08:54 A.M. Greenwich Standard Time,
jacobsen_5 at msn.com writes:

Bill.  Normal cleanup and bearing lube of what??? Tower bearing??  or
Tailtwister??
 
I sure hope you didn't put any lube in the thrust bearing.  It is a  no-no
according to Rohn.  from personal experience I have seen the goo that  forms
when these things are lubricated.  
 
Bill K4XS





_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk at contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk