[TowerTalk] Pinning a high carbon steel mast

[Keith Dutson]

I hoisted a fully charged Milwaukee 1/2 drive cordless drill up the tower
and used a new titanium bit.  I also took up a spare battery but did not
have to use it.

73, Keith NM5G

-----Original Message-----
From: towertalk-bounces at contesting.com
[mailto:towertalk-bounces at contesting.com] On Behalf Of Terry Gerdes
Sent: Wednesday, April 19, 2006 12:26 PM
To: towertalk at contesting.com
Subject: [TowerTalk] Pinning a high carbon steel mast

All,
 
I need to pin one of the Texas Towers high carbon steel masts in the air.
I have pined several steel masts but all on the ground with a drill press.
Any advise?  

Thanks,

Terry - AB5K
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk at contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk