[TowerTalk] Cubical quad questions
johnei7ba at eircom.net
Thu Aug 10 04:50:34 EDT 2006
I don't have the Cubex info, but one thing I can tell you is... Do NOT
drill the arms... Firstly it weakens them, and secondly it's helpful to
be able to adjust the element position. I use strong cable ties (
http://www.iol.ie/~bravo/Cubical%20Quad.htm ) , as does Gem Quad. K2US
uses stainless steel hose clamps and nylon webbing.
John EI7BA http://www.iol.ie/~bravo/*
> I have aquired a 3 element, 3 band, single feed point, HFCubex Cubical Quad. I have tried to contact Cubex by phone and e-mail with no response. The infromation I need is this;
> What is the spreader spacing on the boom?
> Where on the spreader arms are the holes for the 12 and 17 meter antennas drilled (director, driven and reflector)?
> On the feed point balun, where do the 12 and 17 meter antennas attach?
> Any other info about this antenna is helpful. If there is a manual someone could e-mail me, that would be great.
> Thank you,
> Kir Mohror
> TowerTalk mailing list
> TowerTalk at contesting.com
More information about the TowerTalk