[TowerTalk] inexpensive dummy loads

[Larry Phipps]

An excellent source of quality dummy loads is 
http://ridgeequipment.com/store/page1.html

Check out the 75W ones for $9.00. I have checked these out on my HP VNA 
and they are excellent. Only drawback for you is that they use a N 
connector, but they have others. Most really good attenuators and dummy 
loads use N connectors (or BNC).

Larry N8LP
www.telepostinc.com
"Home of the groundbreaking LP-100 Digital Vector Wattmeter"



Jim Lux wrote:
> I'm looking for inexpensive HF dummy loads for a phased array 
> project.  They only need to handle 10 Watts or so, and preferably would 
> have PL259 connectors on them (as opposed to SO239).
>
> I have a few of the $40 MFJ260's (25W continuous rating) and they're in the 
> ballpark, but since I need a bunch of them, I'm looking for something less 
> expensive, if it exists.
>
> Just looking aroundn for other sources of such things.
>
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
>
>
>