[TowerTalk] Assembly Instructions for 3/16 grips and guywire

[donovanf at starpower.net]

Jim,

Big Grip installation instructions are at:

http://www.preformed.com/artsfest/files/AppProc/SP2049-3.pdf

Use heavy duty thimbles, 3/8 inch is okay.  

Typically the big grip is installed so that the first crossover marks are close to the end of the guy strand, but the distance isn't critical.

73!
Frank
W3LPL



---- Original message ----
>Date: Fri, 08 Dec 2006 22:02:21 -0600
>From: "KC4HW" <jimjohnson at alaweb.com>  
>Subject: [TowerTalk] Assembly Instructions for 3/16 grips and guywire  
>To: towertalk at contesting.com
>
>Anyone know of any illustrations on the web to show the proper assembly of 
>3/16 grips and EHS guys.  I plan to use 3/8 thimbles.
>
>Should the EHS actually extend into the loop of the grip?
>
>Jim/KC4HW
>http://www.AlabamaContestGroup
>http://www.AlabamaQSOParty.org (June 2nd and 3rd, 2007)
>
>
>_______________________________________________
>
>
>
>_______________________________________________
>TowerTalk mailing list
>TowerTalk at contesting.com
>http://lists.contesting.com/mailman/listinfo/towertalk