[TowerTalk] rotors

[WB4UNA at aol.com]

I have rebuilt many Ham 2,3 and  4 rotors. The tail  twister is in a 
different shell but the guts are about the same . The best  way is to turn the rotor 
to the north or center position. it will make it  a lot easier to reinstall it. 
like the other guy said always mark  the from top to bottom where it comes 
apart. That way you should be  ok when you stick it back together. The best way 
to take it apart is to  make sure you have it upside down that way the 
bearings will remain on the  top section of the rotor. With that said have fun and 
grease it up real  good and you should have many years of use out of  it...
 
 If I can help drop me a line and will be glad to  help you out.
 
Randy
 
WB4UNA since 1970 
Carlus M. Randy Chavis
247 Goff  Court
West Columbia
SC 29172


BANDS :  SSB,CW
10-160,6,2,432,220
EM93KV