[TowerTalk] Blocking a Crankup

[Peter Chadwick]

Geoff asked: 
>What is the best way to block a crankup before climbing it?<
I have successfully used 2 by 2 by 1/4 inch angle iron, and 1-1/2 inch diameter galvanised pipe with a 1/4 inch wall. Let the sections all sit on something solid.
73
Peter G3RZP





========================================
Message Received: Feb 10 2006, 02:12 PM
From: K6TFZ at aol.com
To: towertalk at contesting.com
Cc: 
Subject: [TowerTalk] Blocking a Crankup

What is the best way to block a crankup before climbing it?
It would be down and almost nested except for top section
so that the rotator can be serviced.
Thank you. Geoff, K6TFZ
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk at contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk