[TowerTalk] Tower-mounted enclosure
Keith Dutson
kdutson at sbcglobal.net
Tue Jan 3 09:15:11 EST 2006
I would choose a ventilated aluminum enclosure. You can mount bulkhead
Polyphasers and attach the box to a tower leg using metal clamps.
73, Keith NM5G
-----Original Message-----
From: towertalk-bounces at contesting.com
[mailto:towertalk-bounces at contesting.com] On Behalf Of Butch
Sent: Monday, January 02, 2006 4:23 PM
To: TOWERTALK
Subject: [TowerTalk] Tower-mounted enclosure
Hi all,
I am about to erect a 50' Rohn 25 tower in my back yard. Atop the tower will
be a small tri-bander, a 6-meter yagi and at the very top, a 10-meter
vertical for local nets/chatting. Suspended from the tower, just below the
tri-bander will be my 75-meter dipole. So, I will have 4 runs of coax
descending the tower to the remote switch and one run from the switch into
the shack.
I am planning to install A Polyphaser on each run, above the switch and
mounted in an enclosure of some type. Any suggestions as to type of
enclosure works well over time? Sealed? Ventilated? Plastic?
Metal?........you get the idea. Thanks.
Butch K4NAU
--
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.1.371 / Virus Database: 267.14.10/218 - Release Date: 1/2/2006
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk at contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
More information about the TowerTalk
mailing list