[TowerTalk] 18 HT Hytower

[Bill Winkis]

Replaced all the standoff insulators,on my 18HT with ..water pump clamps fed through 1" PVC, shaped to the tower edge, then drill a hole the pefect distance off the tower into the end of the pvc. Also notched or elongated the outer edge of the hole in the pvc, a tad, so the screw (see below-1) would slide through. Then feed the element up through the hole.

-1....Also removed all the clamps on the elements, and replaced  them with narrow flat SS self taping screws, so the screw head can now also fit through the hole in the pvc...

-Bill
kc4pe at mindspring.com