[TowerTalk] Monster quad

[noddie]

www.ky6la.com

Take a look at the above site, he has posted a very detailed installation.
Other people have used a hinged bracket to get the ground assembled Monster
on a tilt over.

Mike K6BR

-----Original Message-----
From: towertalk-bounces at contesting.com
[mailto:towertalk-bounces at contesting.com] On Behalf Of K4SAV
Sent: Friday, January 13, 2006 2:18 PM
To: towertalk at contesting.com
Subject: [TowerTalk] Monster quad

I am sitting here looking at the pictures of this monster antenna, 
wondering how you would ever get something like this into the air.  My 
hat's off to the guys who managed to put this up. Amazing feat.  How do 
you think they did it? It obviously has to be assembled while in the 
air. Do you think the guys crawled out on that boom to bolt the elements 
into place?

Full size quad, 3 elements on 80 meters, 5 elements on 40 meters on a 30 
meter boom.
http://www.pbase.com/df3kv/image/46485731
http://www.pbase.com/df3kv/image/46485719


Jerry, K4SAV

peter.voelpel wrote:

>The best approach is to use slewing bearings at the bottom of the tower.
>This freestanding, 40m high, rotatable tower of a fellow ham 
>with stacked long boom quads works flawless for more the 20 years:
>
>http://www.pbase.com/df3kv/image/46485734
>
>http://www.pbase.com/df3kv/image/46485728/original
>
>those bearings are obtainable pretty cheap at crane companies
>
>73
>Peter, DF3KV
>
>
>-----Original Message-----
>From: towertalk-bounces at contesting.com
>[mailto:towertalk-bounces at contesting.com] On Behalf Of Kelly Taylor
>
>My big fear with a tower such as this is that instead of multiple weak
links
>(ring rotors), where perhaps one antenna bites it, you have one big weak
>link that would make the whole assembly bite it. The other angle that is
>perhaps not been explored either is the capacity of the tower to accept
>additional loads along its length.
>
>If I recall correctly, the Big Bertha tower worked because the entire tower
>base was inserted into the bearings which were held down by lots of
concrete
>and because the design assumed from the start multiple antennas from top
>down.
>
>_______________________________________________
>
>
>
>_______________________________________________
>TowerTalk mailing list
>TowerTalk at contesting.com
>http://lists.contesting.com/mailman/listinfo/towertalk
>
>  
>
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk at contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk