[TowerTalk] Fibreglass rod sources?

[K6XN]

Mike

When turning down the fiberglass rod on a lathe please don't forget to use
eye protection and a breathing mask/filter.

73, Ted, K6XN

-----Original Message-----
From: towertalk-bounces at contesting.com
[mailto:towertalk-bounces at contesting.com] On Behalf Of Larry G
Sent: Friday, January 27, 2006 9:44 AM
To: Mike Bragassa, K5UO; towertalk at contesting.com
Subject: Re: [TowerTalk] Fibreglass rod sources?

Hi Mike,

   You can get solid fiberglass rod from MSC (www.mscdirect.com) I used this
rod for my 25G base insulators. You can see a photo of these insulators by
clicking on the Tower 4 link at  www.k7mi.com and scrolling to the bottom
photo. You will need to turn down the ends on a lathe. If you don't have
accesss to a lathe drop me an email and I can help.

73 de Larry K7MI


----- Original Message -----
From: "Mike Bragassa, K5UO" <bragassa at consolidated.net>
To: <towertalk at contesting.com>
Sent: Friday, January 27, 2006 5:21 AM
Subject: [TowerTalk] Fibreglass rod sources?


> Building a 80m vertical from Rohn 25g sections and need some fibreglass
solid rod; 1.5" OD,  preferably 1.75" OD, to insulate/isolate  the Rohn 25
tower base section. Besides Max-Gain Systems (only have up to 1.5"), where
are my choices? A search on fibreglass, fibreglass  rod gets me lots of
fishing poles!
>
> Mike, K5UO, 9H3UO
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
>

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk at contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk