[TowerTalk] stranded cu wire

[Nick Pair]

I must apologize to all on the stranded issue. I miss typed and it should have read that solid  non stranded wire is hard to find in larger sizes than AWG #2 cu.

    


> There has been a lot of talk about stranded conductors. You have trouble 
> getting stranded much larger than >AWG#2 cu from most wholesale houses.


  I've never seen tinned 00 and larger although I'm sure it exists.
  I've seen AWG 750 MCM cu but was normally insulated.



If I understand this correctly the wire would have to be bent down through 
the clamp and then bent back straight to go to the next ground rod. They 
generally emphasize, no sharp bends in the ground system.

  You are correct but it will be more like a ball of metal after they silver solder/braze it all together. Still in all a compromise that favors mechanical durability over the ideal if a t-tap Cadweld.
   
  To all you use a Cadweld system, please prepare as manufactures information and be aware that any moisture can be extremely dangerous. A shot can spray molten copper everywhere.  A shot is kinda like a firecracker and a sparkler all in one with a little bit of smoke bomb added.

  On the generator subject I suggest that anyone thinking about one please read the pertaining sections of the NEC and NFPA or have someone who has, direct you. All union electrical contractors are licensed and hire only licensed workman, with a bond to cover any damages resulting from noncompliance with above organizations. A nice peace of mind.

73
  Nick
  WB7PEK


 		
---------------------------------
Want to be your own boss? Learn how on  Yahoo! Small Business.