[TowerTalk] Grounding the tower..alternatives
Gary Schafer
garyschafer at comcast.net
Wed Jul 19 11:52:23 EDT 2006
> -----Original Message-----
> From: towertalk-bounces at contesting.com [mailto:towertalk-
> bounces at contesting.com] On Behalf Of Cqtestk4xs at aol.com
> Sent: Wednesday, July 19, 2006 6:20 AM
> To: TOWERTALK at contesting.com
> Subject: [TowerTalk] Grounding the tower..alternatives
>
> Braided or solid...that is the question.
>
> Neither. Being a typical ham, I'm cheap. Most hamfests have short
> lengths
> hardline. I got some nice air filled 1/2 inch stuff for free which I
> pounded
> flat. It has lots of surface area and is easy to work with. Another
> alternative is to pick up scrap strips of 6 inch wide copper flashing and
> to cut
> into thinner strips. Again lots of surface area and if you get it at a
> scrap
> metals dealer, it's cost effective.
>
> By the way, for those of you who are familiar with my station, the last of
> the 200 footers is coming down today.
>
> Bill K4XS
Bill,
You need not go to the bother of flattening the hardline. You have the same
surface area with it round or flattened.
73
Gary K4FMX
More information about the TowerTalk
mailing list