[TowerTalk] climbing AN-Wireless/Trylon type towers

Roger Borowski K9RB at bellsouth.net
Fri Jun 9 11:42:19 EDT 2006

see; http://w9iix.com/ii00008.htm  model GP-31T for Trylon Gin Pole Kit
Much safer and easier than just "Lashing it to a leg"!  73, Rog-K9RB

----- Original Message ----- 
From: <K7LXC at aol.com>
To: <towertalk at contesting.com>; <jc-smith at comcast.net>
Sent: Friday, June 09, 2006 10:13 AM
Subject: Re: [TowerTalk] climbing AN-Wireless/Trylon type towers

In a message dated 6/4/2006 9:01:52 A.M. Pacific Daylight Time,
towertalk-request at contesting.com writes:

>  I'm installing a new 80' tower this summer.  It's in a  location that
be accessed by a crane so I'm going to build it in  place like a giant
erector set.  (I'll post a link to photos  soon.)  I know some of you have
done this in the past and I'm curious  how hard it is to climb around on
these towers?

    It's pretty easy. To climb up a Trylon, you  climb on the nose, or leg.
Grab the leg with your hands and then use the  downward sloping diagonals as
steps. They're just about perfectly spaced so  that you can climb them just
a ladder. They don't need step bolts. I've  never climbed an AN tower but
imagine it's similar.

    As far as moving around the tower, just move  across the diagonals while
being hooked in with your fall arrest lanyard.

There is no ginpole available for the Trylon  but I just use a hefty 12'
piece of aluminum tubing and just lash it to the  leg. You need to hook the
to a diagonal to keep it from sliding down as  you use it. Double-block your
haul rope and it'll be able to handle those  assembled heavy sections quite
well. If you're going to do it like a big  Erector Set
you just need a pulley at the top to pull  stuff up with. You'll probably
need 2
guys on the tower to set the legs. I've  done 56 feet plus a day with this

Steve     K7LXC
Professional tower services for hams
Cell: 206-890-4188


TowerTalk mailing list
TowerTalk at contesting.com

More information about the TowerTalk mailing list