[TowerTalk] Using Plenum Plenum Cable

[Scott Neader KA9FOX]

At 02:10 PM 6/21/2006 -0400, you wrote:
>10Base-T is 10MB ethernet over twisted
>pairs, i.e. CAT-5 rated cable.

Not to split hairs, but 10Base-T Ethernet is spec'd to require a minimum of 
CAT3 cable (which is capable of 10Mhz over 100 meters).  CAT5 (100Mhz) 
would be required for 100Base-T.  Not to say you can't run an old 10Base-T 
network over CAT5, but CAT3 will suffice.

- Scott KA9FOX


---------------------------------------------------------------
Scott Neader KA9FOX    ka9fox at qth.com
Free Ham Radio Classified Ads:  http://swap.QTH.com
KA9FOX Contesting & DXing Site: http://www.ka9fox.com