[TowerTalk] Lexan
Hector Garcia XE2K
j_hector_garcia at sbcglobal.net
Mon Jun 26 01:57:29 EDT 2006
Rustoleom pain help a lot in my fiberglass rods and some fiberglas bars in my cubical cuads, here the UV is very high and the temperature vy high in the summer.
other guys use for small pieces of fiberglass (center rods) the plastic tape, the one that come in bottle and is liquid.
My area is very dry, we take care more of the sun damage.
tnx for the other advices
Hector Garcia XE2K / XF1K
Mexicali B.C DM22fp
http://www.dxxe.org
----- Original Message ----
From: K8RI on Tower talk <k8ri-tower at charter.net>
To: TOWERTALK Reflector <TOWERTALK at contesting.com>
Sent: Sunday, June 25, 2006 10:01:13 PM
Subject: Re: [TowerTalk] Lexan
> Jim:
> Also Fiberglass bars can be used , the cutting board brings some ideas to
> my head, i get a few years ago
Fiberglass resin normally does not stand up well to UV unless protected.
>some industrial material , Nylon or similar, that was used for gears in
>some food machine, the one that can be >easy cutted in good element
>brackets, also in the N6CA web page he use something that can be good
> >option.
Nylon is not normally a good electrical material in wet environments.
>
> and also I want to get a good design of 6m Antena using the 3/8 elements
> and KLM original mounting , i >have a 7 elements that i wll like to
> convert in a bigger gain antenna.
Some of the old KLM element insulators had a relatively short life time due
to UV deteoration. I think I replace the ones on my 2-meter FM beams (14L)
twice.
The one son the 20 and 15 meter beams held up well but I only had them up
about 5 years.
Roger Halstead (K8RI and ARRL 40 year Life Member)
N833R - World's oldest Debonair CD-2
www.rogerhalstead.com
>
>
>
>
> Hector Garcia XE2K / XF1K
> Mexicali B.C DM22fp
>
> http://www.dxxe.org
>
>
> ----- Original Message ----
> From: Jim Miller <JimMiller at STL-OnLine.Net>
> To: TOWERTALK Reflector <TOWERTALK at contesting.com>
> Sent: Sunday, June 25, 2006 9:12:45 PM
> Subject: Re: [TowerTalk] Lexan
>
>
> I would like to see replies about using kitchen cutting board material for
> this purpose. Strength, UV, etc.
>
> tnx es 73, de Jim KG0KP
>
> ----- Original Message -----
> From: "Ed Stallman" <n5blz at ev1.net>
> To: <6mEME at yahoogroups.com>; <towertalk at contesting.com>
> Sent: Sunday, June 25, 2006 9:37 PM
> Subject: [TowerTalk] Lexan
>
>
>> I'm building a 6 meter yagi and I'm insulating the elements from the
>> boom.
>> my plans are to use a U bolt with saddle around the boom, then use lexan
>> fastened to the saddle with the 1/2 inch element then fastened to the
>> lexan. The question I have is who is a good source for lexan? I did a
>> search on MCMASTER-CARR web page http://www.mcmaster.com/ for lexan and I
>> found POLYCARBONATE Sheets 1/4 inch thick PN 85805 K28
>> Will this be strong enough? will it hold up under UV ? They have other to
>> choose from, so is their a better choice?
>>
>> Tnx for ur help Ed N5BLZ
>> _______________________________________________
>>
>>
>>
>> _______________________________________________
>> TowerTalk mailing list
>> TowerTalk at contesting.com
>> http://lists.contesting.com/mailman/listinfo/towertalk
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk at contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
More information about the TowerTalk
mailing list