[TowerTalk] Matching coax lengths for stacking Yagis?

[Jim Lux]

At 02:08 PM 3/10/2006, Paul Jansen wrote:
>Is it possible to use an analyzer to check transmission line length if the
>end is terminated in a balun such as those used on the KT34A?
>
>  - Possibly by using it at a much higher or lower frequency than the balun
>was designed for?
>
>
>
>I'm trying to avoid having to remove all the coax seal etc. and then
>shorting out the end as instructed.
>
>
>
>Any suggestions?


Why not short the other side of the balun?