[TowerTalk] torque tightening querry

[hdmc38 at bellsouth.net]

Google Bolt Torque specs.That wil get you close.

                                                 Joe K4XZ
> 
> From: "Naveed at Hotmail" <conficious80 at hotmail.com>
> Date: 2006/05/26 Fri AM 03:32:27 EDT
> To: <towertalk at contesting.com>
> Subject: [TowerTalk] torque tightening querry
> 
> What should be torque tightening for the bolts 0f 20mm and 16mm ASTM A36 , ISO GRADE 5.8 bolts , of a lattice structure which is 60m high and has to resist a wind speed of 150kph , lying in seismic zone IV , dead load in addition to self weight is the feeder cables and ladder  wieghing 0.22kn/m , 8 antenas weighing 23kg each, 4 microwaves wieghing 12kg each, having maximum allowable twist and tilt to be +-0.45 deg.Can you please tell me the source atleast.  ?
> 
> 
> 
> Regards
> NAVEED IRSHAD
> _______________________________________________
> 
> 
> 
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
> 

JOE PATRICK
SENIOR PLUMBING/MECHANICAL
INSPECTOR CITY OF BOYNTON BEACH