[TowerTalk] Winch cable for a LM354

[Bob Maser]

BTW, the specs on the LM 354 Tri-ex tower specifies 3/16" x 7 x 19 aircraft 
cable NOT 1/4".  Look it up in Google under LM 354 Tower Specs.  It is the 
first hit on Google.

Bob
----- Original Message ----- 
From: "Bob Maser" <bmaser at tampabay.rr.com>
To: <KJ6Y at aol.com>; <K7LXC at aol.com>; <towertalk at contesting.com>; 
<k2qmf at juno.com>; <n2tu at roadrunner.com>
Sent: Wednesday, November 01, 2006 8:31 PM
Subject: Re: [TowerTalk] Winch cable for a LM354


> Why does the LM354 use 1/4" when the LM470 use 3/16"?  I've recabled 3 of
> these LM470 towers and the cable replaced was 3/16".  SS cable is weaker 
> and
> costs over 40% more.
>
> Bob W6TR
> ----- Original Message ----- 
> From: <KJ6Y at aol.com>
> To: <K7LXC at aol.com>; <towertalk at contesting.com>; <k2qmf at juno.com>;
> <n2tu at roadrunner.com>
> Sent: Wednesday, November 01, 2006 7:46 PM
> Subject: Re: [TowerTalk] Winch cable for a LM354
>
>
>> LM-354 uses 1/4 in cable.  Stainless is OK.
>>
>> Skip,  KJ6Y
>> _Communications Service  Co_ (http://members.aol.com/kj6y/skip.html)
>> 818-887-3569
>>
>> _______________________________________________
>>
>>
>>
>> _______________________________________________
>> TowerTalk mailing list
>> TowerTalk at contesting.com
>> http://lists.contesting.com/mailman/listinfo/towertalk
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk