[TowerTalk] Winch cable for a LM354

[k2qmf at juno.com]

If you change to SS cable you should
use 1/4 inch instead of 3/16...

Ted

On Wed, 1 Nov 2006 20:44:29 -0500 "Bob Maser" <bmaser at tampabay.rr.com>
writes:
> BTW, the specs on the LM 354 Tri-ex tower specifies 3/16" x 7 x 19 
> aircraft 
> cable NOT 1/4".  Look it up in Google under LM 354 Tower Specs.  It 
> is the 
> first hit on Google.
> 
> Bob
> ----- Original Message ----- 
> From: "Bob Maser" <bmaser at tampabay.rr.com>
> To: <KJ6Y at aol.com>; <K7LXC at aol.com>; <towertalk at contesting.com>; 
> <k2qmf at juno.com>; <n2tu at roadrunner.com>
> Sent: Wednesday, November 01, 2006 8:31 PM
> Subject: Re: [TowerTalk] Winch cable for a LM354
> 
> 
> > Why does the LM354 use 1/4" when the LM470 use 3/16"?  I've 
> recabled 3 of
> > these LM470 towers and the cable replaced was 3/16".  SS cable is 
> weaker 
> > and
> > costs over 40% more.
> >
> > Bob W6TR
> > ----- Original Message ----- 
> > From: <KJ6Y at aol.com>
> > To: <K7LXC at aol.com>; <towertalk at contesting.com>; 
> <k2qmf at juno.com>;
> > <n2tu at roadrunner.com>
> > Sent: Wednesday, November 01, 2006 7:46 PM
> > Subject: Re: [TowerTalk] Winch cable for a LM354
> >
> >
> >> LM-354 uses 1/4 in cable.  Stainless is OK.
> >>
> >> Skip,  KJ6Y
> >> _Communications Service  Co_ 
> (http://members.aol.com/kj6y/skip.html)
> >> 818-887-3569
> >>
> >> _______________________________________________
> >>
> >>
> >>
> >> _______________________________________________
> >> TowerTalk mailing list
> >> TowerTalk at contesting.com
> >> http://lists.contesting.com/mailman/listinfo/towertalk
> >
> > _______________________________________________
> >
> >
> >
> > _______________________________________________
> > TowerTalk mailing list
> > TowerTalk at contesting.com
> > http://lists.contesting.com/mailman/listinfo/towertalk 
> 
> 
>