[TowerTalk] FW: Rohn-25G Removal

[Chet Moore]

makes no sense to me

chet

----- Original Message ----- 
From: <K7LXC at aol.com>
To: <towertalk at contesting.com>; <kb2m at comcast.net>
Sent: Sunday, April 22, 2007 1:00 PM
Subject: Re: [TowerTalk] FW: Rohn-25G Removal


>
> In a message dated 4/22/2007 8:43:23 A.M. Pacific Daylight Time,
> towertalk-request at contesting.com writes:
>
>>    What I'm looking for is a set of two tower jacks  (local name?). One
> piece
> of a  tower jack is a stiff piece of pipe  with feet on one end, the other
> end has what appears to be a upward  pointing rake. In the middle is a
> mechanical jack, that is fully extended.  Fully extended it is then placed
> against the tower and used to jack the  tower down , or  fully closed it 
> is
> then used to jack the tower up.  The second part is a piece of pipe with 
> feet
> on one end, and what appears  to be a stiff up pointing rake, no jack. 
> This
> is used to hold the tower up  while the jack is repositioned. Using these 
> two
> pieces a  tilt over  tower can be easily, and safely raised or lowered.
> A pair of tower  jacks is used to erect or lower a one piece stand-alone
> tower.
>>  A front end loader or pickup could also be used , if  there is room for
> the
> vehicle.
>
>
>        Interesting but I've still  got no idea what you mean. A picture's
> worth 1k words.
>
> Cheers,
> Steve     K7LXC
> TOWER TECH
>
>
>
> ************************************** See what's free at 
> http://www.aol.com.
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>