[TowerTalk] [SPAM] Newbie with tower

[J. Gordon Beattie, Jr., W2TTT]

Mario,
The installation doesn't seem to be able to have sufficient wind load to
move the chimney, but if it did, brick and mortar should flex perceptibly.
If it did, the damage would be evident in the photos and I don't see any.
73,
Gordon, W2TTT
201.314.6964


-----Original Message-----
From: towertalk-bounces at contesting.com
[mailto:towertalk-bounces at contesting.com] On Behalf Of Mario I
Sent: Wednesday, August 01, 2007 1:50 AM
To: towertalk at contesting.com
Subject: [SPAM] [TowerTalk] Newbie with tower

 
Hello All, I just purchased a house with a nice 25' tower.  The building
inspector told me that the 2 straps that hold the tower to my chimney has to
go because the chimney is moving when there is a lot of wind. It is on
picture # 7 and # 8 on the link bellow. My question is: are the two bracket
on picture #2, # 4 and # 5 good enough to hold this tower alone?  If you
look at picture # 1, you will see how it is mounted to the ground. Also, can
you please tell me what kind of antenna's CB or HAM, do I have on that tower
( I know one is a TV Yagi ) and what kind of tower is that?  Here are the
pictures: http://profile.imageshack.us/user/intravino/   Thanks for your
time, Intravino

_______________________________________________
Join Excite! - http://www.excite.com
The most personalized portal on the Web!
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk at contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk