[TowerTalk] 40M4LLDD assembly issue

[Paul Baldock]

I'm putting the 40M4LLDD together and in general it seems to be well 
made. However a see a potential issue with the way they connect the 
liner loading rods to the linear loading arms and wonder if anybody 
has experienced or anticipated a problem and come up with a solution.

The aluminum 3/16" linear loading rod is attached to the aluminum 
linear loading arm by going through an oversize hole at an angle and 
being held in place by a small SS set screw threaded into the 
aluminum. It seems over time this could become a very poor electrical 
connection.

- Paul KW7Y