[TowerTalk] Recommendation for heat gun for shrink wrap
Jeff Carter
towertalk at hidden-valley.com
Thu Aug 23 18:21:22 EDT 2007
I've used my SMD solder station to do this, you just have to watch the heat.
They can be had for $75, so before I spent much on a heat gun I'd think about
buying a SMD station instead and having the additional functionality.
Unless, of course, you do a lot of painting, then you might want to go with
Bill's suggestion...
Jeff/KD4RBG
On Thursday 23 August 2007 18:14, Bill Turner wrote:
> ORIGINAL MESSAGE:
>
> On Thu, 23 Aug 2007 16:09:08 -0500, "fraz1" <fraz1 at bellsouth.net>
>
> wrote:
> >Hi folks.............any recommendation for a good heat gun to be used for
> > shrink wrapping would be appreciated. Also, good known sources for
> > shrink wrap itself.
>
> ------------ REPLY FOLLOWS ------------
>
> I use a Wagner paint stripper. Works like a charm, has variable heat.
> I forget the price, mine is at least ten years old.
>
> Bill W6WRT
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
More information about the TowerTalk
mailing list