[TowerTalk] Fw: Rohn 45 Question
Blake M
n4gi at tampabay.rr.com
Sun Aug 26 13:35:59 EDT 2007
The bottom bolts on a Ham IV I had would work loose every few months when I
had no load on it (I bought into the thrustbearing-takes-the-weight thing
when I was new...). After I placed the full load of antennas and mast on
it, this problem stopped.
Rotors have HUNDREDS of bearings in them. Most thrust bearings I've seen
only have 10-20.... I'm no expert in physics, but where to put all the
weight seems like an easy decision to me.
73,
Blake N4GI
-----Original Message-----
From: towertalk-bounces at contesting.com
[mailto:towertalk-bounces at contesting.com] On Behalf Of K7LXC at aol.com
Roger, thank you for cutting to the chase. You are entirely correct but
hardly anyone is aware of this and only the Orion even mentions it in their
owner's manual. While I haven't seen any catastrophic failure trends with
"floating" rotators, they are all designed to have some preload to seat the
bearings in their races.
Cheers,
Steve K7LXC
TOWER TECH -
Professional tower services for hams
************************************** Get a sneak peek of the all-new AOL
at
http://discover.aol.com/memed/aolcom30tour
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk at contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
More information about the TowerTalk
mailing list