[TowerTalk] 40-2CD

Ted Bryant w4nz at comcast.net
Tue Dec 4 08:05:10 EST 2007


Lloyd,

I had to replace the original screws that connect the loading coil to the tubing in each loading
coil assembly (LCA) on my Cushcraft 402CD.  I split the original heat shrink and trimmed it back
only far enough to expose the screw connections.  I cleaned each connection and used a new stainless
screw to replace the original.  Instead of using new heat shrink to weatherproof the connections I
used alternating layers of a good grade of electrical tape, Scotch 33 or 88, with "liquid tape".

73, Ted W4NZ


-----Original Message-----
From: towertalk-bounces at contesting.com [mailto:towertalk-bounces at contesting.com]On Behalf Of Lloyd
Bell
Sent: Monday, December 03, 2007 12:32 PM
To: towertalk at contesting.com
Subject: [TowerTalk] 40-2CD


Hello All

I'm trying to replace some traps and I'm wondering what kind of heat shrink to use and a supplier?
It looks like the old heat shrink had some kind of mastic on the inside.
Any help would be appreciated.

Tnx  Lloyd  K5ZO


      ____________________________________________________________________________________
Be a better friend, newshound, and
know-it-all with Yahoo! Mobile.  Try it now.
http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk at contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.5.503 / Virus Database: 269.16.13/1165 - Release Date: 12/2/2007 8:34 PM



More information about the TowerTalk mailing list