[TowerTalk] Rohn Trust Bearing/an ounce of prevention....

[john at kk9a.com]

I think this is a bad idea if you are in a corrosive environment as aluminum 
corrodes very rapidly when in contact with stainless steel.

73,
John P40A



To: TOWERTALK at contesting.com
Subject: Re: [TowerTalk] Rohn Trust Bearing/an ounce of prevention....
From: Cqtestk4xs at aol.com
Date: Wed, 5 Dec 2007 00:49:43 EST
List-post: <mailto:towertalk at contesting.com>

The key here is to throw away those ratty bolts Rohn gives you with the
thrust bearing before you install it..  Replace them with stainless steel 
AND
put
Penetrox or some anti-oxidant on the bolt so it won't freeze.  It  worked 
for
me!

Bill K4XS/KH7XS