[TowerTalk] Vendors for 1 3/4 inch mast material?

[Julio Peralta]

If you are going mount an HF beam antenna with 1 3/4" pipe you may have
problems getting the antenna to stay pointed in the same direction. Most
HF beams will work better with a 2" mast. That is not to say that an
antenna can't be attached to a smaller mast but they tend to slip in the
larger mounting hardware.

Julio, W4HY 

-----Original Message-----
From: towertalk-bounces at contesting.com
[mailto:towertalk-bounces at contesting.com] On Behalf Of Bill Howell
Sent: Tuesday, December 11, 2007 4:17 PM
To: towertalk at contesting.com
Subject: [TowerTalk] Vendors for 1 3/4 inch mast material?

I have a Rohn top section which has an OD of 2 inches, so it will only
accept a 1 3/4 inch mast inside it.I've found vendors on the web for 2
inch
mast, but none for 1 3/4 inch.

Does anyone out there have a link for the smaller diameter mast
material?

Thanks,

Bill Howell N5ALO
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk at contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk