[TowerTalk] Surface Rust on Rohn 25

[K7LXC at aol.com]

In a message dated 1/7/2007 9:02:04 A.M. Pacific Standard Time,  
towertalk-request at contesting.com writes:

>  What is the best method, type and brand of products to use  for getting 
rid of surface rust from Rohn 25.

>  I have already  gotten Scotch Brite Pads for cleaning, but there are so 
many brands and  possibilities of Primers and Cold Galvanizing
Paint Sprays I would like to  hear from experience rather than reinvent the 
wheel.


    Cold galvanizing spray paint is plenty. With  those you get what you pay 
for. The cheaper ones don't adhere very well or  coat. LPS makes a good one 
and _www.championradio.com_ (http://www.championradio.com)  has some too.  

I don't know if using a primer coat adds anything  or not.
 
Cheers
Steve      K7LXC
TOWER TECH