[TowerTalk] Coax for crank-up TX-455

[Bill Ogden]

>On my US Tower, I use a 90 degree PVC sweep in the top stand-off, held in
place with 10 or 20 mil thick pipe wrapping tape. I tape the cables to the
standoff arm before they enter the sweep.

I did the same when I first set it up. However, after fooling with several
cable alterations (because I could not make up my mind exactly what I
wanted) I wanted an "open" strain relief where I did not need to feed
cables through a PVC sweep.

There are lots of ways to provide strain relief for a relatively small
tower!

Bill - W2WO