[TowerTalk] LDF4-50 & FSJ4-50 Connector Reuse

[jeremy-ca]

A Google pulls up several urls on how to install. Since connectors have had 
some changes over the years the first step would be to identify exactly what 
you have.

Disassembly is straightforeward as the connectors were designed to be 
reused.

Carl
KM1H
----- Original Message ----- 
From: <w2ttt at att.net>
To: <towertalk at contesting.com>
Sent: Sunday, July 08, 2007 4:08 PM
Subject: [TowerTalk] LDF4-50 & FSJ4-50 Connector Reuse


>I have a nice quantity of each of these Andrew cables and a number of 
>really short jumper cables that I would like to us as source material for 
>connectors that could be used on the longer lengths of hardline.
> My questions are:
> 1. Is there anything special that I should consider when removing the 
> connectors?
> 2. Is there anything that I need to replace when recycling the connectors?
> 3. Differences in the handling (other than flex) between the LDF4-50 and 
> the FSJ4-50?
> 4. Does anyone have a pointer to a step-by-step process for installing N 
> and UHF connectors (male and female) on these cables?
> Thanks &73,
> Gordon, W2TTT
> 201.314.6964
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk