[TowerTalk] Fw: This is what I used to tension myguywiresanditworked .

[Dubovsky, George]

Then this advice won't apply to you, I guess.

73,

geo - n4ua

> -----Original Message-----
> From: towertalk-bounces at contesting.com [mailto:towertalk-
> bounces at contesting.com] On Behalf Of Robert Carroll
> Sent: Wednesday, July 11, 2007 1:48 PM
> To: towertalk at contesting.com
> Subject: Re: [TowerTalk] Fw: This is what I used to tension
> myguywiresanditworked .
> 
> I have elevated guys here, so there is no EHS leader.
> Bob W2WG
> 
> -----Original Message-----
> From: towertalk-bounces at contesting.com
> [mailto:towertalk-bounces at contesting.com] On Behalf Of Ron Todd
> Sent: Wednesday, July 11, 2007 1:16 PM
> To: towertalk at contesting.com
> Subject: [TowerTalk] Fw: This is what I used to tension my
> guywiresanditworked .
> 
> You need a short run of wire near the ground so that where you can use
the
> guage. They do that to keep some kid from cutting or a fire will burn
the
> Phillistrain.
> ----- Original Message -----
> From: "Dubovsky, George" <George.Dubovsky at andrew.com>
> To: "Robert Carroll" <w2wg at comcast.net>; "R Atkins"
> <rusty_atkins at yahoo.com>; <towertalk at contesting.com>
> Sent: Wednesday, July 11, 2007 1:13 PM
> Subject: Re: [TowerTalk] This is what I used to tension my guy
> wiresanditworked .
> 
> 
> > Philly is larger diameter, so it doesn't usually fit in the notches
in
> > the gage. However, you will (should) have an EHS leader at the
> > turn-buckle end of the guy, so you will measure tension on that.
> >
> > 73,
> >
> > geo - n4ua
> >
> >> -----Original Message-----
> >> From: towertalk-bounces at contesting.com [mailto:towertalk-
> >> bounces at contesting.com] On Behalf Of Robert Carroll
> >> Sent: Wednesday, July 11, 2007 12:46 PM
> >> To: 'R Atkins'; towertalk at contesting.com
> >> Subject: Re: [TowerTalk] This is what I used to tension my guy
wires
> >> anditworked .
> >>
> >> Will this type of gauge work with phillistran?
> >>
> >> 73
> >> Bob W2WG
> >>
> >> -----Original Message-----
> >> From: towertalk-bounces at contesting.com
> >> [mailto:towertalk-bounces at contesting.com] On Behalf Of R Atkins
> >> Sent: Wednesday, July 11, 2007 12:35 PM
> >> To: towertalk at contesting.com
> >> Subject: Re: [TowerTalk] This is what I used to tension my guy
wires
> > and
> >> itworked .
> >>
> >> Yes, they work very well, and I am ordering one, but I need a way
to
> > get
> >> the
> >> tension close.. temporarily. I have to have this done by Friday
> > afternoon
> >> for the contest this weekend and I'm not going to pay for overnight
> >> shipping... hence my question. :-/
> >>
> >> Thanks!
> >>
> >> >This is what I used to tension my guy wires and it worked .
> >> > http://www.championradio.com/rigging.html    Professional Model
> >>PT-2
> >> 79.00
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >
________________________________________________________________________
> > __
> >> __
> >> ________
> >> Need Mail bonding?
> >> Go to the Yahoo! Mail Q&A for great tips from Yahoo! Answers users.
> >> http://answers.yahoo.com/dir/?link=list&sid=396546091
> >> _______________________________________________
> >>
> >>
> >>
> >> _______________________________________________
> >> TowerTalk mailing list
> >> TowerTalk at contesting.com
> >> http://lists.contesting.com/mailman/listinfo/towertalk
> >>
> >> _______________________________________________
> >>
> >>
> >>
> >> _______________________________________________
> >> TowerTalk mailing list
> >> TowerTalk at contesting.com
> >> http://lists.contesting.com/mailman/listinfo/towertalk
> >>
> >
> >
> >
>
------------------------------------------------------------------------
--
> --
> --------------------
> > This message is for the designated recipient only and may
> > contain privileged, proprietary, or otherwise private information.
> > If you have received it in error, please notify the sender
> > immediately and delete the original.  Any unauthorized use of
> > this email is prohibited.
> >
>
------------------------------------------------------------------------
--
> --
> --------------------
> > [mf2]
> >
> > _______________________________________________
> >
> >
> >
> > _______________________________________________
> > TowerTalk mailing list
> > TowerTalk at contesting.com
> > http://lists.contesting.com/mailman/listinfo/towertalk
> >
> >
> 
> _______________________________________________
> 
> 
> 
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
> 
> _______________________________________________
> 
> 
> 
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
> 


------------------------------------------------------------------------------------------------
This message is for the designated recipient only and may
contain privileged, proprietary, or otherwise private information.  
If you have received it in error, please notify the sender
immediately and delete the original.  Any unauthorized use of
this email is prohibited.
------------------------------------------------------------------------------------------------
[mf2]