[TowerTalk] Wind area for Rohn tower sections

[Dubovsky, George]

Clay,

OK, I found my July '87 Rohn catalog, and extracted the following data:

Area (square ft/lin ft)
Rohn 25 - 0.254
Rohn 45 - 0.293
Rohn 55 - 9.334
Rohn 65 - 0.459

I presume this is effective area, but they don't state explicitly. Hope
this helps...

73,

geo - n4ua

> -----Original Message-----
> From: towertalk-bounces at contesting.com [mailto:towertalk-
> bounces at contesting.com] On Behalf Of W7CE
> Sent: Thursday, July 12, 2007 12:14 PM
> To: R Atkins; towertalk at contesting.com
> Subject: Re: [TowerTalk] Wind area for Rohn tower sections
> 
> I'm not looking for the antenna wind area that the tower can support.
I'm
> looking for the maximum wind area of the 25G thorugh 65G tower
sections
> themselves.
> 
> > Go here:
> >
> >
http://www.radiancorp.com/ROHNNET/rohnnet2001/catalog/html/gtowers.html
> >
> >
> > Click on the links for each tower model, then look at the guy
details
> for
> > the height and county wind speed rating you are curious about.
> >
> > Note that there are two numbers. one for round elements and one for
> > square.
> >
> 
> _______________________________________________
> 
> 
> 
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
> 


------------------------------------------------------------------------------------------------
This message is for the designated recipient only and may
contain privileged, proprietary, or otherwise private information.  
If you have received it in error, please notify the sender
immediately and delete the original.  Any unauthorized use of
this email is prohibited.
------------------------------------------------------------------------------------------------
[mf2]