[TowerTalk] new tower

[jeremy-ca]

1. What do you plan to put on it?

2. Id strongly suggest a pier pin base no matter what sort of guying.

3. I have 180' of 45G up 17 years and it has withstood hurricanes, 
northeasters, microbursts, severe icing, etc. And that was with a 4 stack of 
40' booms on 20 and 4/4 40M KLM's. I dont even count the several 20' tall 2 
way radio sticks, plus the 20' mast and a 38' boom 6M yagi.
I use 1/4 EHS guys at 70% of height.

Carl
KM1H


----- Original Message ----- 
From: "Paul Hemby" <phemby at hotmail.com>
To: <towertalk at contesting.com>
Sent: Friday, July 13, 2007 5:26 PM
Subject: [TowerTalk] new tower


>I would like to install 170 feet of Rohn 45 tower.  The problem is that the
> specs call for guy points to be 136 feet.  My lot is only 170 feet wide
> which will give me about 96 feet on each guy point.  Is there anyway to
> elevate the guy points enough, such as using H beam to make this work, or
> increasing the size of the guy cables, pouring additional concrete, etc, 
> the
> tower can be bracketed to the poured concrete bond beam on a concrete 
> block
> garage at 10 feet if this would help.  Any help or ideas would be
> appreciated.   Thanks Paul WN4AMO
>
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>